Secure the sub-frame

Fig 1: Sub-Frame Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position and apply mobile jack 9985972 under the left-hand side of the sub-frame.

Install the screws for the support bracket loosely.

Remove screws 9995517 and 9995518 .

Install the screws for the sub-frame. Use 4 new M14 screws. Lubricate the screw threads.

NOTE:

The washer for the front screw.

Transfer the mobile jack to the right-hand side and repeat the procedure as above.

Tighten the screws. Tighten to 105 Nm . Angle-tighten to 120° . Use protractor 9512050 .

Tighten the support bracket screws. Tighten to 50 Nm .