LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> S60 T-5, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Adjustment, Removal & Installation >> Brakes >> Power brake booster (DSTC), replacing (version 1) >> Removal >> Preparations for removing the master cylinder

Preparations for removing the master cylinder

Fig 1: Power Brake Booster And Master Cylinder Connectors
GLL104505Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

Cars with 6-cylinder engines:  Disconnect the connectors on the master cylinder.

Mark up a connector.

Disconnect the connectors on the power brake booster.

NOTE:

If the car has hydraulic clutch: Block the hose to the clutch cylinder. Use hose pliers.

scientia non olet · About LEMON Manuals