LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> S60 R, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Adjustment, Removal & Installation >> Brakes >> Power brake booster (DSTC), replacing (version 1) >> Removal >> Remove the master cylinder

Remove the master cylinder

Fig 1: Removing/Installing Master Cylinder
GLL104509Courtesy of VOLVO CARS OF NORTH AMERICA.

Avoid brake fluid spillage when removing.

NOTE:

Ensure that the gasket between the power brake booster and the master cylinder stays in place on the master cylinder.

Remove the soundproofing panel and the power brake booster 

For the power brake booster, see Remove the nuts for the power brake booster at the pedal box .

scientia non olet · About LEMON Manuals