LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2007 >> S60 Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation >> Brake Booster, Master Cylinder, Reservoir (L.H.D; 2001-2009) >> Power brake booster, replacing >> Removal >> Preparations for removing the master cylinder

Preparations for removing the master cylinder

Fig 1: Identifying Vacuum Hose And Connectors
GLL104505Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:

On cars with 6-cylinder engines:  Disconnect the connectors from the master cylinder.

Mark up a connector.

Disconnect the connectors on the power brake booster.

NOTE:

If the car has hydraulic clutch: Block the hose to the clutch cylinder. Use hose pliers.

scientia non olet · About LEMON Manuals