Bushing Rear Lateral Link, Replacing: Installation: Finishing

Fig 1: Brake Caliper Disc

Courtesy of VOLVO CARS OF NORTH AMERICA.

Applies only to All-wheel drive (AWD): 

Tension the rear suspension to the normal position. See Normal position .

Does not apply to AWD: 

Install tensioner and tension the rear suspension to the normal position. See Tensioner, instructions for use .

Applies to all models: 

Tighten the screws for the lateral link. Tighten to 80 Nm  .

Install: 

• the brake disc
• the brake caliper. Use new screws. Tighten to 50 Nm 
• the brake line bracket
• the wheel. See Installing wheels .

Check/adjust the wheel alignment. See: Wheel alignment, checking / adjusting .