Installing The Brake Cable For The Parking Brake

Fig 1: Installing Brake Cable

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Install the mounting for the cables on the sub-frame and the clips on the tie rods
• Thread the mechanical cables into the brake covers.

HINT: Lubricate the O-rings on the guide sleeves of the mechanical cables. Use silicone grease. 

Fig 2: Identifying Parking Brake Adjuster

Courtesy of VOLVO CARS OF NORTH AMERICA.

Hook the expander in the plate bracket.

Install: 

• the expander
• the return spring
• the brake disc
• the brake disc locating pin. Tighten to 10 Nm  .