Installing The Upper Front Control Arm Bushing

Fig 1: Installing Counter Hold In Control Arm Mounting Thread

Courtesy of VOLVO CARS OF NORTH AMERICA.

Use tool 9512923 with 9997054 , 9997035 and 9997040
Thread the control arm in
Press the bushing onto the end of the control arm. Install the counterhold in the control arm mounting thread
Use screw 9997041
Install the hydraulic cylinder using thread rod 9997034 in the other mounting thread for the control arm
Tighten the bushing.

Fig 2: Ensuring That Bushing Is In Correct Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Ensure that the bushing is in the correct position.