Finishing Work (Continued)

Adjust the parking brake. See Adjust the handbrake .

Install: 

• the exhaust system. See Exhaust system, replacing
• the wheels.

Applies only to All-wheel drive (AWD) 

• Install the propeller shaft in the viscous coupling alternatively. See Final drive, replacing .

Applies only to cars with Active on Demand Coupling: 

Install: 

• the cable harness in the clips on the sub-frame
• the Active on Demand Coupling connector.

Does not apply to AWD: 

Install: 

• the two screws for the spring seat mounting. Tighten to 24 Nm 
• the cargo compartment carpet.

All cars: 

Carry out wheel alignment.

Check/adjust the wheel alignment. See: Wheel alignment, checking / adjusting .