Checking components and wiring
WARNING: This page is about a different variant/trim than selected.
Check that the fuses in the fusebox in the passenger compartment are intact.
Check the cable between control module terminal #21 and siren connector terminal #2. Check for an open-circuit. Check for a short-circuit to ground.
Check the wiring from the fuse in the passenger compartment to siren connector terminal #1. Check for an open-circuit. Check for a short-circuit to ground.
Remedy as necessary.
Re-configure the siren if no faults are found.
Other information:
- Replace the siren. See Siren, replacing
- Checking wiring and terminals .
- Continue
OKAY: Troubleshooting has been completed.