Checking wiring or terminals

Communication between the remote control and the remote start unit is OK. Fault-tracing indicates that the wiring or terminals between the remote start unit and the accessory electronic module (AEM) are defective.

Remedy as necessary.

Other information: 

• To connect the breakout box, see Connecting the breakout box. Accessory electronic module
• To access or replace the Accessory Electronic Module (AEM) and connector, see Replacing the accessory electronic module
• For information about signals, see Signal description. Accessory electronic module (AEM)
• To fault-trace wiring and terminals see Contents

• Continue 

  Refer to Verification