Checking relay and wires

Check relay (2/63).

HINT: The voltage should be 12 V at pins 1 and 3 when main beam is on. 

Check the wire between 3 and fuse number 1 in the engine compartment fuse box (11B/1).

Also check the connector and fuse.

Check the wire between 1 (2/63) and interior compartment fuse number 10 (left main beam) and number 11 (right main beam) and the fuses.

Fig 1: Identifying Relays

Courtesy of VOLVO CARS OF NORTH AMERICA.

Is there a fault? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking the wires