Checking the right seat
WARNING: This page is about a different variant/trim than selected.
Read off the programming by clicking on the VCT2000 symbol.
To change the seat temperature, mark the desired value in the scrolling list and start programming.
Programming must be carried out so that the high temperature setting is higher than the low temperature setting.
- Continue
Refer to Save the programmed value
Read off the programming by clicking on the VCT2000 symbol.
To change the seat temperature, mark the desired value in the scrolling list and start programming.
Programming must be carried out so that the high temperature setting is higher than the low temperature setting.
- Continue
Refer to Save the programmed value