Removing the screws from the torque converter

Alternative 1 

Fig 1: Twisting Tool Installed

Courtesy of VOLVO CARS OF NORTH AMERICA.

Installing twisting tool 9995395 .

Turn the engine until the screws can be removed. Use a Torx tool (TX50).

Alternative 2 

Fig 2: Screw In Cut-Out Between The Engine And The Transaxle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Slacken off and remove the screws in the cut-out between the engine and the transaxle from below.

Turn the engine using a screwdriver in the cut-out under the transaxle.