Circuit test continued

Measure the resistance between terminal #2 and ground and between terminal #4 and ground on the cable connector.

1. The ohmmeter displays an incorrect value between terminal #4 and ground
2. The ohmmeter displays an incorrect value between terminal #2 and ground
3. The ohmmeter displays the correct value.

Fig 1: Identifying Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Select one of the above response options. 

• 1 

  Refer to Checking ground lead 

• 2 

  Refer to Checking the power supply 

• 3 

  FAULT NOT FOUND:  Troubleshooting has been completed.