LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2006 >> S80 FWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake And Exhaust System - Cleaning, Inspection And Adjustment >> Crankcase Ventilation And Electronic Throttle Module (ETM) (B6284T; 1999-2001) >> Crankcase Ventilation And Electronic Throttle Module (ETM), Cleaning >> Installing >> Installing The Throttle Body

Installing The Throttle Body

Fig 1: Identifying Throttle Body And Screws
GLL153610Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

Raise the car.

Remove the splashguard under the engine.

Tighten the 4 x screws for the throttle body.

Lower the car.