Programming the distance covered for service (km)

There are three service parameter units which can be programmed. Using this parameter, the number of km (miles) is set which the car must cover before the SRL lamp switches on. (Service reminder lamp)

Choices can be made between 5000, 7500, 10000, 15000 or 20000 km (miles).

Read the programmed data.

If the service parameter is to be changed, mark the desired value in the scrolling list and start the programming.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Programming the service time parameters