Collision Protection Unit From Behind Front Seat Check: Notes

Operation Number(s): 85244-2

Fig 1: Identifying Front Seat

Courtesy of VOLVO CARS OF NORTH AMERICA.

Only applies to vehicle with fixed backrest.

Remove the following items:

Side panel. See Side Panel Front Seat, Replacing
End-plate. See End Mounting, Replacing .

Fig 2: Identifying Front Seat Rivet

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Front Seat Rivet And End-Plate

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION: The operation must be performed on both sides of the seat.

CAUTION: No visible space may be seen between the rivet and end-plate.

Fig 4: Identifying Visible Space Between Rivet And End-Plate

Courtesy of VOLVO CARS OF NORTH AMERICA.

In case of visible space between the rivet and end-plate, the rear end collision module for front seat shall be replaced Rear End Collision Module Front Seat .

Fig 5: Identifying Front Seat Backrest

Courtesy of VOLVO CARS OF NORTH AMERICA.

Only applies to vehicle with foldable backrest.

Fig 6: Identifying Backrest Angle

Courtesy of VOLVO CARS OF NORTH AMERICA.

Adjust the backrest angle until the unit is visible.

Fig 7: Identifying Rivet And End-Plate

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION: The operation must be performed on both sides of the seat.

CAUTION: No visible space may be seen between the rivet and end-plate.

Fig 8: Identifying Visible Space Between Rivet And End-Plate

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION: In case of visible space between the rivet and end-plate, the rear end collision module for front seat shall be replaced Rear End Collision Module Front Seat .

To install, reverse the removal procedure