Checking intermittent short circuit to ground

Activate window by clicking on the VCT 2000 symbol.

Bring up the relay so that it is still connected.

Check power supply to relay by measuring voltage between #3 in the relay socket and ground.

HINT: The voltage between #3 and ground should be battery voltage. 

If value deviates from this, check wire for intermittent open circuit, as described in Open-circuit, intermittent faults .

Additional information: 

• To access the window lift relay, see Central electronic module (CEM), replacing .
• Do the necessary corrective action.

Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Relays And Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to Information