Bumper guard
- Wash any dirt and road debris from the front of the car.
NOTE:
Two people are required to secure the bumper guard in the correct position for marking the holes.
- Take hold of the bumper guard as illustrated. Position the top edge of the bumper guard against the lower edge of the three air baffles at the front, to mark out the holes for mounting.
- Use your thumbs to press against the upper ends of the bumper guard at (B) so that the bumper guard can be turned at (A). Carefully angle the lower edge of the bumper guard outwards, maintaining the position of the top edges (A), so that the two ends of the studs can be marked.
NOTE:
Do not change the lateral or vertical positions of the bumper guard. Incorrect hole markings can result in the bumper guard being installed incorrectly.
- The second person can now mark the ends of the studs using a drop of color paint or similar
- Carefully bend the lower edge of the bumper guard towards the front so that the studs are positioned at the markings.