Signal too low: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Engine START Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect connectors, install components, etc.
• Key in position III.

  Check that 15 voltage is OK.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is voltage on the wire high? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information