Installing the brake pads

Fig 1: Identifying Left And Right Brake Pads

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Brake Caliper

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press piston back into cylinder on brake caliper.

Check that the dust cover is correctly positioned.

Install:

Fig 3: Removing/Installing Retaining Springs And Locating Pins For Brake Pads

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Check the rubber sleeves of the locating pins. Replace if necessary.

Insert the locating pins in the rubber sleeves.

Tighten the locating pins. Tighten. See: Tightening torque .

Install protective caps (1).

Install the retaining spring (3).