Cleaning the crankcase ventilation: Removing

Fig 1: Identifying Intake Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the screws, x 10, at the intake pipe mating flange.

Lift off the upper section of the intake pipe.

Install 9995723 .

Fig 2: Identifying Hoses And T-Nipple

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the dipstick tube
• the thick hoses, 2 x, from the T nipple.

Fig 1: Identifying Dipstick Tube And Inlet Hose

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the dip stick pipe to facilitate access
• the charge air hose from the charge air pipe.

The banjo nipple is located on the underneath of the intake manifold behind the mounting for the dip stick pipe.