LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> XC90 T-6 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper Rail, Grille, Hood Catch And Mudguard - Removal, Replacement And Installation >> Hood (2003-2011) >> Cable Hood Catch, Replacing >> Installing The Mechanical Cable For The Hood Catches

Installing The Mechanical Cable For The Hood Catches

NOTE:

For tightening torques, see TIGHTENING TORQUE .

Feed the cable sleeve into the plastic pipe to its correct position. Ensure that the marking is at the front of the plastic pipe.

NOTE:

Note how the cable sleeve is routed to the hood catches.

Install the panel for the hood catch mechanism. Hook the cable into place.

Install: 

scientia non olet · About LEMON Manuals