Checking Speed Related Power Steering (2005-2014): Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS CORPORATION

Fig 2: Connecting Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Engine running.

  Change the vehicle speed signal from the central electronic module (CEM) by clicking on the VCT2000 symbol.

  Switch between 0 km/h and 110 km/h and test at the same time, by turning the steering wheel, that the servo assistance for the steering changes in relation to the speed.

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Does the servo assistance change in relation to the speed? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION