Removing Lifting Beams And The Lifting Hook
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
Twist in the tab on the cable harness holder.
Install the screw for the gear-shift position sensor and holder. Tighten to 25 Nm .
Install the lever on the gear shift linkage rod. Tighten the nut. Tighten to 16 Nm .