Installing The Drive Shaft Seal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of VOLVO CARS OF NORTH AMERICA.
NOTE:
Clean thoroughly before installing the new seal.
Lubricate the seal lip using ATF oil, P/N 116 1521, (1 liter containers).
Use drift
9997063
and shaft
9991801
.
Carefully tap the drive shaft seal in until the drift is in contact with the chain housing.