LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> V70 R, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation >> Brake Pipe And Connections (2001-2003) >> Brake pipe from hydraulic unit / front wheel / junction, replacing >> Front-rear brake pipe to the rear junctions, replacing >> Install the new brake pipe

Install the new brake pipe

Fig 1: Straightening Brake Pipe By ABS Hydraulic Modulator
GLL104485Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the cut-off brake pipe. Install the new one.

Tighten the brake pipe in the joint nipple. Tighten to 22 Nm  .

Secure the brake pipe in its clips in the body floor.

Bend and adjust the brake pipe so that it aligns with the hydraulic unit.