Throttle body (electronic throttle module), replacing

Removing the throttle unit 

Fig 1: Throttle Unit, Hoses And Clips

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the hose between the throttle unit and the air cleaner (ACL) housing
• the connector for the throttle unit
• the cable from the clip on the throttle unit
• the vacuum hoses
• the screws
• the throttle unit
• the gasket.

Installing the throttle unit 

Fig 2: Throttle Unit, Hoses And Clips

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the throttle unit. Use a new gasket  . Tighten to 10 Nm 
• the vacuum hoses
• the connector for the throttle unit
• the cable in the clip on the throttle unit
• the hose between the throttle unit and the air cleaner (ACL) housing.

Remedy as necessary.