Installing the front bumper

NOTE:

For tightening torques, see: Tightening torque .

Install:

the 2 connectors for the fog lamps
the quick-release connector for the hose for the headlamp washer
the bumper cover.

NOTE:

Ensure that the bumper cover is correctly positioned on the slide mountings on the sides.

Install:

the 6 clips at the top edge of the bumper cover
the 2 screws. Tighten
the 2 covers
the 2 clips on the underside of the bumper cover.

Tighten the 2 screws for the sliding mounts.