Checking clock in the information module: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition On Position

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect connectors, install components etc.
• Ignition on.

  Check that the clock is working by setting the correct time and waiting a few minutes.

Is the clock working? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information