Seat belt rear, center, removing

Fig 1: Removing Center Seat Belt Rear

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Remove the upholstery
• Remove the white protective tab
• Remove the screw and nut for the upper locating pin
• Remove the upper locating pin
• Remove the seat belt. Twist the seat belt 180° and thread it through the upper guide
• Remove the entire seat belt.

• Install in reverse order.

Use a new nut. Tighten to: 25 Nm.

Tighten the upper locating pin. Tighten to: 18 Nm.