Checking the power cable

Check the cable between canister purge (CP) valve terminal #2 and system relay base 2/14 terminal #5. Check for an open-circuit according to Open-circuit, permanent faults .

Remedy as necessary.

Fig 1: Identifying Canister Purge (CP) Valve Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Ohmmeter

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying System Relay Base Connector Terminals

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Continue 

  Refer to Verification