Installing the front wheels

Fig 1: Identifying Wheel Installation

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the wheel nuts but do not tighten.
Then tighten crosswise. Tighten to 110 Nm .
CAUTION: Crosswise tightening and torque tightening is important to prevent stresses in the brake disc.
Torque socket 9512661 must be used when tightening with an impact wrench.

NOTE: The torque socket is designed for tightening wheel nuts using a standard pneumatic impact nut runner providing a torque of 250-350 Nm .

Lower the car .