Checking the vacuum control valve
Start the engine
See below, checking the control valve
| Vacuum under 45 kPa | Pump running | System OK |
| Vacuum under 45 kPa | Pump not running | Replace control valve |
| Vacuum over 60 kPa | Pump stops | System OK |
| Vacuum over 60 kPa | Pump does not stop | Replace control valve |
| Vacuum does not go over 60 kPa | Pump does not stop | Check for leakage of the line, pump - valve or Checking the vacuum pump |
Turn off the engine
Fit the vacuum line to the induction pipe.