Checking the LPG indicator lamp: Verification

HINT: After carrying out the repair, check that the fault has been remedied.

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Reinstall the connectors, components etc.
Connect the breakout box to the Liquefied petroleum gas (LPG) control module wiring. See Connecting the breakout box to the LPG control module . Leave the control module disconnected
Ignition on.
Temporarily connect a cable to the breakout box between terminal #A29 (#J1/29) and ground. The LPG indicator lamp should then light.

Remove the temporary cable after the check.

Fig 2: Instrument Cluster
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Terminals
Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the function OK?