Connecting the breakout box

Fig 1: Breakout Box

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Disconnect the combined instrument panel
• Disconnect the combined instrument panel connectors.

On the combined instrument panel connectors check that:

- The male and female terminals are undamaged and are properly secured (cannot be pressed in).

- The wiring for the female terminals is securely connected.

- In particular check those terminals that are relevant to the stored diagnostic trouble code (DTC) or symptom.

Connect adapter 9511372 to the control module connectors. Connect breakout box 9813190 to the adapter.

Disconnect the breakout box in reverse order.