Signal too high / Signal missing: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Fig 2: Connecting Connector

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.

  Read the diagnostic trouble codes.

  If diagnostic trouble code has changed to intermittent status this indicates that the fault is no longer activated.

  Fig 3: Identifying VCT2000

  

Is the diagnostic trouble code intermittent? 

• YES 

  VERIFIED:   Troubleshooting has been completed.

• NO 

  Refer to Information