Signal missing. Permanent fault: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on.
• Activate solenoid SLU.

  Read off the current through the solenoid SLU circuit.

  The current should oscillate between 0 and 1000 mA.

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the current oscillate? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information