Checking for contact resistance and oxidation
- Ignition off
- Check the transmission connectors and transmission control module (TCM) connector. Check for contact resistance and oxidation. See Contact resistance and oxidation
- Reconnect the connectors, reinstall components etc.
- Test drive the car. See.
Check for any clearly audible noises from the transmission. Check for malfunctions.
Other information
- To access the transmission connectors, see Connectors, transmission, disconnecting / connecting
- To access the control module connector, see Transmission control module (TCM), replacing .
Is the transmission operating correctly?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Replacing the control system