Faulty signal: Checks: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on
• Depress the brake pedal. Move the gear selector to "Quickshift" position
• Move the gear selector to + and check that the gear selection is updated in the display on the combined instrument panel. Move the gear selector to -. Check that the gear selection is updated.

Was the function OK? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Information