Checking lock-up solenoid SL

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on
• Gear selector in position P.
• Activate the lock-up solenoid SL.

  The status should switch between OFF and ON.

  If the status does not change, it indicates that there is an internal fault in the transmission control module (TCM).

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the status change? 

• YES 

  FAULT NOT FOUND:  Troubleshooting has been completed.

• NO 

  Refer to Transmission control module (TCM) replacement and programming