Checking the temperature sensor

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Disconnect the transmission connector
Connect adapter 9511505 and 9813190 to the transmission connector (transmission side)
Connect an ohmmeter between terminals #L (terminal #A11) and #M (terminal #A12).
The resistance must be 3.4-3.6 kΩ at 20 °C.

Other information
- To connect the breakout box to the transmission connector, see Connecting the breakout box, GM automatic transmissions
- For information about signals, see Signal specification
- For information about the resistance values, see Component resistance values
- For information about the resistance values, see Component resistance values .
Fig 2: Identifying Ohms Display
Courtesy of VOLVO CARS OF NORTH AMERICA.

Was the resistance OK?