When replacing with a new transmission: Notes
NOTE:
Check the identification plate on the transmission to ensure that the correct transmission is selected for installation.
These screws and nuts must be replaced when replacing the transmission
| P/N | Number | Designation |
|---|---|---|
| 979 671 | 6 | Screw (torque converter) |
| 981 062 | 4 | Sems screw (sub-frame) |
| 971 098 | 4 | Nut (steering gear) |
| 863 4179 | 2 | Sems nut (ball joints) |
| 981 771 | 2 | Sems screw (drive shaft) |
| 980 985 | 1 | Screw (steering shaft) |
| 945 408 | 1 | Nut (steering shaft) |
| 971 099 | 1 | Flange lock nut (tie rod) |