Installing engine compartment components

Fig 1: Identifying Splash Guard Plate Screw And Upper/Lower Screws For Oil Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the screw for the splash guard. Tighten to 25 Nm 
• the engine pad. Tighten to 50 Nm 
• the turbo pipe to the turbocharger (TC). Tighten the clamp
• the lower screw for the oil pipe. Tighten to 25 Nm 
• the upper screw for the oil pipe
• the connector
• the tie strap around the electrical wiring.

Install the integrated relay / fusebox. See Install the integrated relay / fusebox .