LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission - Removal, Replacement And Installation - 2 Of 2 >> Transmission, Automatic (B6284T, 4T65EV-Gt; 1999-2001) >> Transmission, installing >> When replacing with a new transmission >> Installing and tightening the screws for the transmission

Installing and tightening the screws for the transmission

Fig 1: Locating Differential Housing Screws
GLL109274Courtesy of VOLVO CARS OF NORTH AMERICA.

Install all 6 screws for the transmission and engine.

At the same time, check that the whole of the transmission is in contact with the engine.

Then tighten the transmission / engine screws crosswise. Tighten to 50 Nm  .

Remove the fixture from the transmission.

Install the 2 screws on the bracket at the cover for the differential housing.

Tighten the screws. Tighten to 50 Nm  .

scientia non olet · About LEMON Manuals