LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission - Removal, Replacement And Installation - 2 Of 2 >> Transmission, Automatic (B6284T, 4T65EV-Gt; 1999-2001) >> Transmission, installing >> When replacing with a new transmission >> Checking before installing

Checking before installing

Flushing clean the oil cooler 

When replacing the transmission, the oil cooler must always be flushed clean because there may be particles in the oil cooler. See Oil cooler, flush cleaning .

Fig 1: Identifying Engine Mating Surface On Transmission
GLL109291Courtesy of VOLVO CARS OF NORTH AMERICA.

Check that the transmission and engine mating surfaces are absolutely  clean.

Also check that the guide sleeves towards the engine are in position and are free of faults.

Lubricate the holes in the transmission (for the guide pins). Use a little grease.

scientia non olet · About LEMON Manuals