Removing the screws for the transmission and starter motor and the ground lead

Fig 1: Identifying Transmission, Starter Motor And Ground Lead Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the 3 screws for the transaxle/engine
• the screw for the ignition setting sender (lift up the ignition setting sender)
• the 2 screws for the starter motor. Remove the starter motor
• the ground lead screw under the starter motor
• the screw for the clamp holding the positive cable on the engine.

Tie the hoses and the cable harness to the intake manifold.