LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission - Removal, Replacement And Installation - 2 Of 2 >> Transmission, Automatic (B6284T, 4T65EV-Gt; 1999-2001) >> Replacing differential housing cover >> Install the bracket on the cylinder block

Install the bracket on the cylinder block

Fig 1: Identifying Bracket Between Transmission And Engine
GLL101580Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

Tighten all the screws in the differential housing cover. Tighten to 50 Nm  .

Tighten the bracket screws. Tighten to 50 Nm  .

NOTE:

There axial clearance must be 0.12 mm - 0.67 mm between the differential and the differential housing cover.

scientia non olet · About LEMON Manuals