Remove the lifting beam and the lifting hook from the engine and the car

Fig 1: Identifying Special Tool 999 5717 (Lifting Lug) And Engine Mounting Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the lifting fixture from the motor. Reinstall the screws. Tighten to 50 Nm  .

Reinstall the spark plug cover. Tighten the screws. Tighten to 10 Nm.

Install the ground strip. Tighten to 10 Nm  .

Applies only to turbocharged cars 

Lift up the delivery lines. Install the spark plug cover.

Tighten the screws.