Installing new gaskets

Fig 1: Identifying Gasket 371

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install gasket 371 marked V on the valve housing.

Fig 2: Identifying Distribution Plate 370

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the distribution plate 370 on the gasket.

The strainers must be replaced if they are damaged. See the illustration for their positions.

Lock the gasket and the distribution plate in the valve housing using the two plastic plugs. Apply a little petroleum jelly to the outer ends of the distribution plate so that the gasket C does not slide.

Fig 3: Identifying Gasket 369

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install gasket 369 marked C on the distribution plate.